- Characteristics of Product
COSMONATE M-200 is polymeric MDI, generally used in manufacturing hard and semi-hard polyurethane foam. COSMONATE M-200 is liquefied in normal temperature and easily handled and stored down to -20℃. It is solvent-free form with 2.7 average organic function and maximum of 220 cps (25℃) viscosity which is mixed with monomer MDI of 4,4-diphenyl methane diisocyante and its oligomer above dimer, trimer and tetramer.
- Product Application
- Product standards & general properties
|NCO content||ASTM D 1638||wt%||30.0∼32.0|
|Viscosity (25℃)||ASTM D 1638||cps||150∼230|
|H.C content||ASTM D 1638||%||Max.0.3|
|Acid content||ASTM D 1638||%||Max.0.1|
|Specific gravity (25℃)||ASTM D 1638||–||1.23∼1.25|
|Product Exterior||Brown Liquid|
|Freezing point||℃||below -20|
|Evaporation pressure (25℃)||mmHg||ignorable level|
– Applied area
COSMONATE M-200 uses 250kg drum package or bulk supply.
- Safety and Hearth
Skin contact might cause rash or inflammation and eye contact might cause severe pain and excessive exposure might cause sight disorder. Also, if you inhaled MDI steam, it would cause bronchial asthma, headache, difficulty to breathing, and etc, and in case of taken, it will cause stimulation and inflammation of digestive organs. If contacted with skin, wash out with much water or soapy water. If contacted with eyes, wash out with much water or soapywater for about 15 minutes and get medical examination. Also, if you inhaled MDI steam, move to the fresh area, keep warm stabilized, and practice artificial respiration when it’s necessary. If swallowed, feed much water or milk, or raw egg and make them throw up, then get medical examination as soon as possible. It has very rare ignition danger, but watch out for fire hazard if digested, carbonic acid gas digestion is suitable. In case of conflagration, put out with water.
- Storage and Handling
COSMONATE M-200’s proper keeping temperature is 5~35℃. Be extremely cautious so that water doesn’t get mixed in storage instrument and seal the instrument with dry nitrogen gas. In case of working with MDI, wear the proper safety tools. If necessary, install ventilation equipment or wear gas mask. After work, be certain to wash with soapy water and clean the contaminated overalls before you wear it.